Inconel 600 (Alloy 600 - UNSN0600)

Inconel 600 (Alloy 600 - UNS N0600) Steel Pipes & Tubes

Stockists, Exporters and Suppliers for Inconel 600 (UNS N0600) Pipes Tubes Fittings & Flanges

Common Trade Names :
Inconel 600®, Nickelvac® 600, Ferrochronin® 600

Inconel 600 is an alloy that is extremely resistant to heat & corrosion and hence is widely used in various engineering processes. With high tensile strength, Inconel can be hardened and strengthened only by cold work. This alloy 600 is extensively used in heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays.
The Inconel 600 / UNS N06600 can be availed in various forms like Inconel 600 wire, Inconel 600 round bar, Inconel 600 forged bar, Inconel 600 hex bar, Inconel 600 flat bar, Inconel 600 circles, Inconel 600 ring, Inconel 600 tube, Inconel 600 seamless pipe, Inconel 825 welded / ERW pipe, Inconel 825 sheet, Inconel 825 plate, Inconel 825 coil, Inconel 825 flanges, Inconel 825 fasteners, Inconel 825 socket weld fittings, Inconel 825 ferrule fittings, Inconel 825 buttweld fittings Like cap , elbow, tee, Reducer.
UNS N06600 is available in various forms like wire, Round bar, Forged bar, hex bar, Flat bar, circles, ring, tube, seamless pipe, welded / ERW Pipe, sheet, plate, coil, flanges, fasteners, socket weld fittings, ferrule fittings, Buttweld fittings Like cap, elbow, tee, reducer at industrial rate.

UNS N06600 is available in various forms like cap, elbow, erw pipes, fasteners, fittings, flange, plate, reducer, round bar, seamless pipes, sheet, tee and tube at industrial rate.

Chemical Analysis of ALLOY 600 (UNS N06600)
Inconel 600®, Nickelvac® 600, Ferrochronin® 600

C
Mn
S
Si
Cr
Ni
Cu
Fe
0.15 Max
1.0 Max
0.015 Max
0.50 Max
14.0- 17.0
72.0 Min
0.50 Max
6.0 - 10.0

Specifications

Inconel 600 Sheet / Plate Inconel 600 Round Bar Inconel 600 Pipe Inconel 600 Tube Inconel 600 Fittings Inconel 600 Forgings
ASME SB-168
AMS 5540
ASME SB-166
AMS 5665
ASME SB-167 ASME SB-829 ASME SB-517 ASME SB-775 ASME SB-163 ASME SB-516 ASME SB751 AMS 5580 ASME SB-366 ASME SB-564 AMS 5665

 

Trademark Notice : Some names are trade names and /or trademarks of specific manufacturers. Rolf Engg. Solutions Inc. is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s).

 

Names are listed solely for reference to help identify products consistent with listed specifications.

Inconel 600 Reducers Inconel 600 Concentric Reducers Inconel 600 Tees
Inconel 600 Pipe Nipples Inconel 600 Stub end Inconel  600 Tees
Inconel 600 Elbows Inconel 600 3D Elbow Inconel 600 Stub Ends
Inconel 600 End Caps Inconel 600 5D Elbow Inconel 600 180° SR Return Bends
Inconel 600 Long Radius Elbow Inconel 600 Eccentric Reducers Inconel 600 Reducing Crosses
Inconel 600 Elbows Inconel 600 Crosses Inconel 600 Couplings
Inconel 600 Short Radius Elbow Inconel 600 Pipe Bends Inconel 600 45° Elbows
Inconel 600 Reducing Elbow Inconel 600 Piggable Bends Inconel 600 180° LR Return Bends
Inconel 600 Forged Caps Inconel 600 Forged Tees Inconel 600 Unions
Inconel 600 Couplings Inconel 600 Forged Reducers Inconel 600  Forged Crosses
Inconel 600  90° Forged Elbows Inconel 600 Inserts Inconel 600 Forged Plug
Inconel 600 45° Forged Elbows Inconel 600 Street Elbows Inconel 600 Bushings
Inconel 600 Forged Fittings Inconel 600 Fittings Inconel 600 Socket weld Fitting
Inconel 600 Forged Fittings Inconel 600 Fittings Inconel 600 Threaded Fitting
Inconel 600 Forged Fittings Inconel 600 Forged Pipe Fittings Inconel 600 Forged Pipe Fittings
Inconel 600 Blind Flanges Inconel 600 Plate Flanges Inconel 600 ASME Flanges
Inconel 600 Reducing Flanges Inconel 600 Weld Neck Flanges Inconel 600 Industrial Flanges
Inconel 600 Threaded Flanges Inconel 600 Lap Joint Flanges Inconel 600 Long weld Neck Flanges
Inconel 600 Slip-On Flanges Inconel 600 Socket Weld Flanges Inconel 600 Orifice Flanges
Inconel 600 Flat Flanges Inconel 600 DIN Flanges Inconel 600 ANSI Flanges
Inconel 600 Pipe Flanges Inconel 600 Flanges Inconel 600 Forged Flanges

 

UNS N06600 Reducers UNS N06600 Concentric Reducers UNS N06600 Tees
UNS N06600 Pipe Nipples UNS N06600 Stub end UNS N06600 Tees
UNS N06600 Elbows UNS N06600 3D Elbow UNS N06600 Stub Ends
UNS N06600 End Caps UNS N06600 5D Elbow UNS N06600 180° SR Return Bends
UNS N06600 Long Radius Elbow UNS N06600 Eccentric Reducers UNS N06600 Reducing Crosses
UNS N06600 Elbows UNS N06600 Crosses UNS N06600 Couplings
UNS N06600 Short Radius Elbow UNS N06600 Pipe Bends UNS N06600 45° Elbows
UNS N06600 Reducing Elbow UNS N06600 Piggable Bends UNS N06600 180° LR Return Bends
UNS N06600 Forged Caps UNS N06600 Forged Tees UNS N06600 Unions
UNS N06600 Couplings UNS N06600 Forged Reducers UNS N06600  Forged Crosses
UNS N06600  90° Forged Elbows UNS N06600 Inserts UNS N06600 Forged Plug
UNS N06600 45° Forged Elbows UNS N06600 Street Elbows UNS N06600 Bushings
UNS N06600 Forged Fittings UNS N06600 Fittings UNS N06600 Socket weld Fitting
UNS N06600 Forged Fittings UNS N06600 Fittings UNS N06600 Threaded Fitting
UNS N06600 Forged Fittings UNS N06600 Forged Pipe Fittings UNS N06600 Forged Pipe Fittings
UNS N06600 Blind Flanges UNS N06600 Plate Flanges UNS N06600 ASME Flanges
UNS N06600 Reducing Flanges UNS N06600 Weld Neck Flanges UNS N06600 Industrial Flanges
UNS N06600 Threaded Flanges UNS N06600 Lap Joint Flanges UNS N06600 Long weld Neck Flanges
UNS N06600 Slip-On Flanges UNS N06600 Socket Weld Flanges UNS N06600 Orifice Flanges
UNS N06600 Flat Flanges UNS N06600 DIN Flanges UNS N06600 ANSI Flanges
UNS N06600 Pipe Flanges UNS N06600 Flanges UNS N06600 Forged Flanges
We Export
Eastern Europe Asia North America Western Europe Middle East Africa
Austral asia Central South UAE America Portugal
Spain Indonesia Italy Angola Poland
Brazil Sri Lanka Russia Chile Singapore
Oman Venezuela Costa Rica USA Qatar
Thailand Canada Saudi Arabia Bahrain Egypt
Malaysia Turkey Mexico Chine Peru
United States Nigeria Jordan Kuwait Dubai
Bangkok Iran Germany UK New Zealand
Vietnam South Africa Kazakhstan