Nickel 200/201

Nickel 200/201 Steel Pipes & Tubes

Exporters Suppliers for nickel alloy 200, nickel 200 pipe, nickel alloy pipes, nickel 201 tube, nickel 200 seamless tube, nickel alloy tube stockiest

Common Trade Names :
Nickel 200, Nickel 99.2

Nickel 200 is 99.6% tough metals that can be found on the earth's surface. This metal has excellent mechanical properties such as low gas content, high thermal and electrical conductivity. Owing to these properties as well as its chemical composition, Nickel 200 is highly resistant to corrosive environment and corrosion by neutral and alkaline salt solutions. It corrodes at a low rate in neutral and distilled water.
This Nickel 200 is extremely useful in any environment below 600° F. We offer this nickel 200 in various forms like wire , Round bar, Forged bar , hex bar , Flat bar , Circles , Ring , Tube , seamless Pipe , Welded / ERW Pipe , Sheet , Plate , Coil , Flanges , fasteners , Socket weld Fittings , ferrule fittings , Buttweld fittings Like cap , elbow , tee , Reducer. Our Nickel 200 Sheet, Nickel 200 Plate and nickel 200 products are available in pure (99.2%) wrought nickel with good mechanical properties and resistance to a range of corrosive media.

Nickel 200/UNS N02200 is available in Nickel 200 wire , Nickel 200 Round bar, Nickel 200 Forged bar , Nickel 200 hex bar , Nickel 200 Flat bar , Nickel 200 Circles , Nickel 200 Ring , Nickel 200 Tube , Nickel 200 seamless Pipe , Nickel 200 Welded / ERW Pipe , Nickel 200 Sheet , Nickel 200 Plate , Nickel 200 Coil , Nickel 200 Flanges , Nickel 200 fasteners , Nickel 200 Socket weld Fittings , Nickel 200 ferrule fittings , Nickel 200 Buttweld fittings Like cap , elbow , tee , Reducer.
The various Alloys The development of the Duplex stainless steels has continued, graded for their corrosion performance depending on their alloy content. Today, modern duplex stainless steel can be divided into four groups :

Chemical Analysis of Nickel 200 (UNS N02200) 

C
Mn
S
Si
Ni
Cu
Fe
0.15 Max
0.35 Max
0.01 Max
0.35 Max
99.0 Max
0.25 Max
0.40 Max

 

Specifications

International Specification Nickel 200 Sheet / Plate Nickel 200 Round Bar Nickel 200 Pipe Nickel 200 Tube Nickel 200 Fittings Nickel 200 Forgings
BS 3072, BS 3073, BS 3074, BS 3075, BS 3076, NA11 ASME SB-168 ASME SB-160 ASME SB-161 SB-829 SB-775 SB-725 ASME SB-161 SB-163 SB-730 SB-751 ASME SB-366 ASME SB-564
DIN 17740, 17750, 17751, 17752, 17753, 17754
Werkstoff Nr. 2.4060, 2.4066

Trademark Notice : Some names are trade names and /or trademarks of specific manufacturers. Rolf Engg. Solutions Inc. is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s).

Names are listed solely for reference to help identify products consistent with listed specifications.

NICKEL 200 Reducers NICKEL 200 Concentric Reducers NICKEL 200 Tees
NICKEL 200 Pipe Nipples NICKEL 200 Stub end NICKEL 200 Tees
NICKEL 200 Elbows NICKEL 200 3D Elbow NICKEL 200 Stub Ends
NICKEL 200 End Caps NICKEL 200 5D Elbow NICKEL 200 180° SR Return Bends
NICKEL 200 Long Radius Elbow NICKEL 200 Eccentric Reducers NICKEL 200 Reducing Crosses
NICKEL 200 Elbows NICKEL 200 Crosses NICKEL 200 Couplings
NICKEL 200 Short Radius Elbow NICKEL 200 Pipe Bends NICKEL 200 45° Elbows
NICKEL 200 Reducing Elbow NICKEL 200 Piggable Bends NICKEL 200 180° LR Return Bends
NICKEL 200 Forged Caps NICKEL 200 Forged Tees NICKEL 200 Unions
NICKEL 200 Couplings NICKEL 200 Forged Reducers NICKEL 200  Forged Crosses
NICKEL 200  90° Forged Elbows NICKEL 200 Inserts NICKEL 200 Forged Plug
NICKEL 200 45° Forged Elbows NICKEL 200 Street Elbows NICKEL 200 Bushings
NICKEL 200 Forged Fittings NICKEL 200 Fittings NICKEL 200 Socket weld Fitting
NICKEL 200 Forged Fittings NICKEL 200 Fittings NICKEL 200 Threaded Fitting
NICKEL 200 Forged Fittings NICKEL 200 Forged Pipe Fittings NICKEL 200 Forged Pipe Fittings
NICKEL 200 Blind Flanges NICKEL 200 Plate Flanges NICKEL 200 ASME Flanges
NICKEL 200 Reducing Flanges NICKEL 200 Weld Neck Flanges NICKEL 200 Industrial Flanges
NICKEL 200 Threaded Flanges NICKEL 200 Lap Joint Flanges NICKEL 200 Long weld Neck Flanges
NICKEL 200 Slip-On Flanges NICKEL 200 Socket Weld Flanges NICKEL 200 Orifice Flanges
NICKEL 200 Flat Flanges NICKEL 200 DIN Flanges NICKEL 200 ANSI Flanges
NICKEL 200 Pipe Flanges NICKEL 200 Flanges NICKEL 200 Forged Flanges

 

NICKEL 201 Reducers NICKEL 201 Concentric Reducers NICKEL 201 Tees
NICKEL 201 Pipe Nipples NICKEL 201 Stub end NICKEL 201 Tees
NICKEL 201 Elbows NICKEL 201 3D Elbow NICKEL 201 Stub Ends
NICKEL 201 End Caps NICKEL 201 5D Elbow NICKEL 201 180° SR Return Bends
NICKEL 201 Long Radius Elbow NICKEL 201 Eccentric Reducers NICKEL 201 Reducing Crosses
NICKEL 201 Elbows NICKEL 201 Crosses NICKEL 201 Couplings
NICKEL 201 Short Radius Elbow NICKEL 201 Pipe Bends NICKEL 201 45° Elbows
NICKEL 201 Reducing Elbow NICKEL 201 Piggable Bends NICKEL 201 180° LR Return Bends
NICKEL 201 Forged Caps NICKEL 201 Forged Tees NICKEL 201 Unions
NICKEL 201 Couplings NICKEL 201 Forged Reducers NICKEL 201  Forged Crosses
NICKEL 201  90° Forged Elbows NICKEL 201 Inserts NICKEL 201 Forged Plug
NICKEL 201 45° Forged Elbows NICKEL 201 Street Elbows NICKEL 201 Bushings
NICKEL 201 Forged Fittings NICKEL 201 Fittings NICKEL 201 Socket weld Fitting
NICKEL 201 Forged Fittings NICKEL 201 Fittings NICKEL 201 Threaded Fitting
NICKEL 201 Forged Fittings NICKEL 201 Forged Pipe Fittings NICKEL 201 Forged Pipe Fittings
NICKEL 201 Blind Flanges NICKEL 201 Plate Flanges NICKEL 201 ASME Flanges
NICKEL 201 Reducing Flanges NICKEL 201 Weld Neck Flanges NICKEL 201 Industrial Flanges
NICKEL 201 Threaded Flanges NICKEL 201 Lap Joint Flanges NICKEL 201 Long weld Neck Flanges
NICKEL 201 Slip-On Flanges NICKEL 201 Socket Weld Flanges NICKEL 201 Orifice Flanges
NICKEL 201 Flat Flanges NICKEL 201 DIN Flanges NICKEL 201 ANSI Flanges
NICKEL 201 Pipe Flanges NICKEL 201 Flanges NICKEL 201 Forged Flanges
We Export
Eastern Europe Asia North America Western Europe Middle East Africa
Austral asia Central South UAE America Portugal
Spain Indonesia Italy Angola Poland
Brazil Sri Lanka Russia Chile Singapore
Oman Venezuela Costa Rica USA Qatar
Thailand Canada Saudi Arabia Bahrain Egypt
Malaysia Turkey Mexico Chine Peru
United States Nigeria Jordan Kuwait Dubai
Bangkok Iran Germany UK New Zealand
Vietnam South Africa Kazakhstan