Monel 400 (Alloy 400 - UNSN04400)

Monel 400 (Alloy 400 - UNS N04400) Steel Pipes & Tubes

Common Trade Names :
Monel 400®, Nickelvac® 400, Nicorros® 400

Monel 400 is a combination of nickel and copper and is hardened by cold working only. This alloy is widely renowned for for its corrosion resistant properties against flowing sea - water and is extensively used for marine applications. Monel is also extremely resistant to stress corrosion cracking in most freshwaters. High temperature ( up to 1000 °F) has no effect on this alloy and it also has excellent mechanical properties at subzero temperatures.
Monel 400 is available in many forms like wire, round bar, Forged bar, hex bar, Flat bar, Circles, Ring, Tube, seamless Pipe, Welded / ERW Pipe, Sheet, Plate, Coil, Flanges, fasteners, Socket weld Fittings, ferrule fittings, Buttweld fittings Like cap, elbow, tee. UNS N04400 is available in various forms like Monel 400 wire, Monel 400 Round bar, Monel 400 Forged bar, Monel 400 hex bar, Monel 400 Flat bar, Monel 400 Circles, Monel 400 Ring, Monel 400 Tube, Monel 400 seamless Pipe, Monel 400 Welded / ERW Pipe, Monel 400 Sheet, Monel 400 Plate, Monel 400 Coil, Monel 400 Flanges, Monel 400 fasteners, Monel 400 Socket weld Fittings, Monel 400 ferrule fittings, Monel 400 Buttweld fittings Like cap, elbow, tee, reducer.

UNS N04400 is available in various forms like cap, elbow, erw pipes, fasteners, fittings, flange, plate, reducer, round bar, seamless pipes, sheet, tee and tube.

Chemical Analysis of ALLOY 400 (UNS N04400)
Monel 400®, Nickelvac® 400, Nicorros® 400

C

Mn

S

Si

Ni
Cu
Al

Fe

0.25 Max

1.5 Max

0.01 Max

0.5 Max

63.0 Min
27.0 - 33.0
2.30 - 3.15

2.5 Max

Specifications

Monel 400 Sheet / Plate Monel 400 Round Bar Monel 400 Pipe Monel 400Tube Monel 400 Fittings Monel 400 Forgings
QQ N 286 ASME SB-865
AMS 4676
QQ N 286
      QQ N 286
AMS 4676

 

Monel K500® - UNS N05500

 

Common Trade Name :
Monel K-500® is a nickel-copper alloy with the same corrosion resistance and characteristics as the Monel 400®. The Monel K-500® has a greater strength and hardness then the 400, as a result of added aluminum and titanium. In age-hardened condition, it has greater tendency toward stress- corrosion cracking in some environments.Monel K-500 is available in various forms are Bars, Forge Bar, Fasteners and Forge Fittings. Chemical Analysis of Monel K500® (UNS N05500)

Monel K500 is an age-hardened version of Monel 400, that means it has higher strength and resistance to corrosives, especially seawater. Wide range of alloy K-500 is available in various forms like Bars, Forge Bar, Fasteners and Forge Fittings. 

UNS N05500 is available in various forms like Bars, Forge Bar, Fasteners and Forge Fittings. 

Chemical Analysis of ALLOY K500 (UNS N05500)
Monel K500®, Nickelvac® K500, Nicorros® K500

C

Mn

S

Si

Ni
Cu
Al

Fe

0.3 Max

2.0 Max

0.024 Max

0.5 Max

63.0 Max
27.0 - 33.0
2.3 - 3.15

2.0 Max

Specifications

Monel K500 Sheet / Plate Monel K500 Round Bar Monel K500 Pipe Monel K500 Tube Monel K500 Fittings Monel K500 Forgings
QQ N 286 ASME SB-865
AMS 4676
QQN 286
      ASME SB-564

 

Trademark Notice : Some names are trade names and /or trademarks of specific manufacturers. Reliable Pipes and Tubes Ltd. is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s).

Names are listed solely for reference to help identify products consistent with listed specifications.

ALLOY 400 Reducers ALLOY 400 Concentric Reducers ALLOY 400 Tees
ALLOY 400 Pipe Nipples ALLOY 400 Stub end ALLOY 400 Tees
ALLOY 400 Elbows ALLOY 400 3D Elbow ALLOY 400 Stub Ends
ALLOY 400 End Caps ALLOY 400 5D Elbow ALLOY 400 180° SR Return Bends
ALLOY 400 Long Radius Elbow ALLOY 400 Eccentric Reducers ALLOY 400 Reducing Crosses
ALLOY 400 Elbows ALLOY 400 Crosses ALLOY 400 Couplings
ALLOY 400 Short Radius Elbow ALLOY 400 Pipe Bends ALLOY 400 45° Elbows
ALLOY 400 Reducing Elbow ALLOY 400 Piggable Bends ALLOY 400 180° LR Return Bends
ALLOY 400 Forged Caps ALLOY 400 Forged Tees ALLOY 400 Unions
ALLOY 400 Couplings ALLOY 400 Forged Reducers ALLOY 400  Forged Crosses
ALLOY 400  90° Forged Elbows ALLOY 400 Inserts ALLOY 400 Forged Plug
ALLOY 400 45° Forged Elbows ALLOY 400 Street Elbows ALLOY 400 Bushings
ALLOY 400 Forged Fittings ALLOY 400 Fittings ALLOY 400 Socket weld Fitting
ALLOY 400 Forged Fittings ALLOY 400 Fittings ALLOY 400 Threaded Fitting
ALLOY 400 Forged Fittings ALLOY 400 Forged Pipe Fittings ALLOY 400 Forged Pipe Fittings
ALLOY 400 Blind Flanges ALLOY 400 Plate Flanges ALLOY 400 ASME Flanges
ALLOY 400 Reducing Flanges ALLOY 400 Weld Neck Flanges ALLOY 400 Industrial Flanges
ALLOY 400 Threaded Flanges ALLOY 400 Lap Joint Flanges ALLOY 400 Long weld Neck Flanges
ALLOY 400 Slip-On Flanges ALLOY 400 Socket Weld Flanges ALLOY 400 Orifice Flanges
ALLOY 400 Flat Flanges ALLOY 400 DIN Flanges ALLOY 400 ANSI Flanges
ALLOY 400 Pipe Flanges ALLOY 400 Flanges ALLOY 400 Forged Flanges

 

Monel 400 Reducers Monel 400 Concentric Reducers Monel 400 Tees
Monel 400 Pipe Nipples Monel 400 Stub end Monel 400 Tees
Monel 400 Elbows Monel 400 3D Elbow Monel 400 Stub Ends
Monel 400 End Caps Monel 400 5D Elbow Monel 400 180° SR Return Bends
Monel 400 Long Radius Elbow Monel 400 Eccentric Reducers Monel 400 Reducing Crosses
Monel 400 Elbows Monel 400 Crosses Monel 400 Couplings
Monel 400 Short Radius Elbow Monel 400 Pipe Bends Monel 400 45° Elbows
Monel 400 Reducing Elbow Monel 400 Piggable Bends Monel 400 180° LR Return Bends
Monel 400 Forged Caps Monel 400 Forged Tees Monel 400 Unions
Monel 400 Couplings Monel 400 Forged Reducers Monel 400  Forged Crosses
Monel 400  90° Forged Elbows Monel 400 Inserts Monel 400 Forged Plug
Monel 400 45° Forged Elbows Monel 400 Street Elbows Monel 400 Bushings
Monel 400 Forged Fittings Monel 400 Fittings Monel 400 Socket weld Fitting
Monel 400 Forged Fittings Monel 400 Fittings Monel 400 Threaded Fitting
Monel 400 Forged Fittings Monel 400 Forged Pipe Fittings Monel 400 Forged Pipe Fittings
Monel 400 Blind Flanges Monel 400 Plate Flanges Monel 400 ASME Flanges
Monel 400 Reducing Flanges Monel 400 Weld Neck Flanges Monel 400 Industrial Flanges
Monel 400 Threaded Flanges Monel 400 Lap Joint Flanges Monel 400 Long weld Neck Flanges
Monel 400 Slip-On Flanges Monel 400 Socket Weld Flanges Monel 400 Orifice Flanges
Monel 400 Flat Flanges Monel 400 DIN Flanges Monel 400 ANSI Flanges
Monel 400 Pipe Flanges Monel 400 Flanges Monel 400 Forged Flanges

 

UNS N04400 Reducers UNS N04400 Concentric Reducers UNS N04400 Tees
UNS N04400 Pipe Nipples UNS N04400 Stub end UNS N04400 Tees
UNS N04400 Elbows UNS N04400 3D Elbow UNS N04400 Stub Ends
UNS N04400 End Caps UNS N04400 5D Elbow UNS N04400 180° SR Return Bends
UNS N04400 Long Radius Elbow UNS N04400 Eccentric Reducers UNS N04400 Reducing Crosses
UNS N04400 Elbows UNS N04400 Crosses UNS N04400 Couplings
UNS N04400 Short Radius Elbow UNS N04400 Pipe Bends UNS N04400 45° Elbows
UNS N04400 Reducing Elbow UNS N04400 Piggable Bends UNS N04400 180° LR Return Bends
UNS N04400 Forged Caps UNS N04400 Forged Tees UNS N04400 Unions
UNS N04400 Couplings UNS N04400 Forged Reducers UNS N04400  Forged Crosses
UNS N04400  90° Forged Elbows UNS N04400 Inserts UNS N04400 Forged Plug
UNS N04400 45° Forged Elbows UNS N04400 Street Elbows UNS N04400 Bushings
UNS N04400 Forged Fittings UNS N04400 Fittings UNS N04400 Socket weld Fitting
UNS N04400 Forged Fittings UNS N04400 Fittings UNS N04400 Threaded Fitting
UNS N04400 Forged Fittings UNS N04400 Forged Pipe Fittings UNS N04400 Forged Pipe Fittings
UNS N04400 Blind Flanges UNS N04400 Plate Flanges UNS N04400 ASME Flanges
UNS N04400 Reducing Flanges UNS N04400 Weld Neck Flanges UNS N04400 Industrial Flanges
UNS N04400 Threaded Flanges UNS N04400 Lap Joint Flanges UNS N04400 Long weld Neck Flanges
UNS N04400 Slip-On Flanges UNS N04400 Socket Weld Flanges UNS N04400 Orifice Flanges
UNS N04400 Flat Flanges UNS N04400 DIN Flanges UNS N04400 ANSI Flanges
UNS N04400 Pipe Flanges UNS N04400 Flanges UNS N04400 Forged Flanges

 

UNS N05500 Reducers UNS N05500 Concentric Reducers UNS N05500 Tees
UNS N05500 Pipe Nipples UNS N05500 Stub end UNS N05500 Tees
UNS N05500 Elbows UNS N05500 3D Elbow UNS N05500 Stub Ends
UNS N05500 End Caps UNS N05500 5D Elbow UNS N05500 180° SR Return Bends
UNS N05500 Long Radius Elbow UNS N05500 Eccentric Reducers UNS N05500 Reducing Crosses
UNS N05500 Elbows UNS N05500 Crosses UNS N05500 Couplings
UNS N05500 Short Radius Elbow UNS N05500 Pipe Bends UNS N05500 45° Elbows
UNS N05500 Reducing Elbow UNS N05500 Piggable Bends UNS N05500 180° LR Return Bends
UNS N05500 Forged Caps UNS N05500 Forged Tees UNS N05500 Unions
UNS N05500 Couplings UNS N05500 Forged Reducers UNS N05500  Forged Crosses
UNS N05500  90° Forged Elbows UNS N05500 Inserts UNS N05500 Forged Plug
UNS N05500 45° Forged Elbows UNS N05500 Street Elbows UNS N05500 Bushings
UNS N05500 Forged Fittings UNS N05500 Fittings UNS N05500 Socket weld Fitting
UNS N05500 Forged Fittings UNS N05500 Fittings UNS N05500 Threaded Fitting
UNS N05500 Forged Fittings UNS N05500 Forged Pipe Fittings UNS N05500 Forged Pipe Fittings
UNS N05500 Blind Flanges UNS N05500 Plate Flanges UNS N05500 ASME Flanges
UNS N05500 Reducing Flanges UNS N05500 Weld Neck Flanges UNS N05500 Industrial Flanges
UNS N05500 Threaded Flanges UNS N05500 Lap Joint Flanges UNS N05500 Long weld Neck Flanges
UNS N05500 Slip-On Flanges UNS N05500 Socket Weld Flanges UNS N05500 Orifice Flanges
UNS N05500 Flat Flanges UNS N05500 DIN Flanges UNS N05500 ANSI Flanges
UNS N05500 Pipe Flanges UNS N05500 Flanges UNS N05500 Forged Flanges

 

Monel k500 Reducers Monel k500 Concentric Reducers Monel k500 Tees
Monel k500 Pipe Nipples Monel k500 Stub end Monel k500 Tees
Monel k500 Elbows Monel k500 3D Elbow Monel k500 Stub Ends
Monel k500 End Caps Monel k500 5D Elbow Monel k500 180° SR Return Bends
Monel k500 Long Radius Elbow Monel k500 Eccentric Reducers Monel k500 Reducing Crosses
Monel k500 Elbows Monel k500 Crosses Monel k500 Couplings
Monel k500 Short Radius Elbow Monel k500 Pipe Bends Monel k500 45° Elbows
Monel k500 Reducing Elbow Monel k500 Piggable Bends Monel k500 180° LR Return Bends
Monel k500 Forged Caps Monel k500 Forged Tees Monel k500 Unions
Monel k500 Couplings Monel k500 Forged Reducers Monel k500  Forged Crosses
Monel k500  90° Forged Elbows Monel k500 Inserts Monel k500 Forged Plug
Monel k500 45° Forged Elbows Monel k500 Street Elbows Monel k500 Bushings
Monel k500 Forged Fittings Monel k500 Fittings Monel k500 Socket weld Fitting
Monel k500 Forged Fittings Monel k500 Fittings Monel k500 Threaded Fitting
Monel k500 Forged Fittings Monel k500 Forged Pipe Fittings Monel k500 Forged Pipe Fittings
Monel k500 Blind Flanges Monel k500 Plate Flanges Monel k500 ASME Flanges
Monel k500 Reducing Flanges Monel k500 Weld Neck Flanges Monel k500 Industrial Flanges
Monel k500 Threaded Flanges Monel k500 Lap Joint Flanges Monel k500 Long weld Neck Flanges
Monel k500 Slip-On Flanges Monel k500 Socket Weld Flanges Monel k500 Orifice Flanges
Monel k500 Flat Flanges Monel k500 DIN Flanges Monel k500 ANSI Flanges
Monel k500 Pipe Flanges Monel k500 Flanges Monel k500 Forged Flanges

 

25 NiCrMo 4 25C4 P35 25CrMo4E 26/5 Mo
25-17-4Mn 25C4 P50 25CrMo4KD 260
25-20 25C4 P70 25CrMoS4 260 W
25-20Si 25C8 25CrMoVA 260 WT
25-21L 25C8 P25 25G 2601
25-32-3 25C8 P35 25G-Sh 2603
25-4-4 25C8 P50 25G2 2606
25-5-1L 25C8 P70 25G2F 260Y
25-50-6 25Ch12N2V2M2F 25G2NbY 261
25-7-3 25Ch13G20AF1 25G2S 2614
25-7-4 25Ch13N2 25G2Y 2615
25-9-4 L 25Ch13N2VMF 25GA 2622
25-PV 25Ch15KJuBF 25GNb 2624
25.10.4.L 25Ch17N2 25GNbV 2625
25.20.5.LCu 25Ch18N8V2 25GS2 2631
25.20.B 25Ch18N9S2 25GSL 2632
25.20.C 25Ch1M1F 25GST 2634
25.20.HC 25Ch1M1FA 25GV 2642
25.20.L 25Ch1M1FA-Sh 25H2N4WA 2644
25.22.2 25Ch1M1FA-VD 25H3M 265
25.22.2.LMn 25Ch1MF 25HGNMA 2652
25.22.2.LMnB 25Ch20N9V2M 25HGS 2654
25.7.4.L 25Ch2G2FL 25HM 265D
25/20 25Ch2GNMFL 25HMA 2662
25/25 Ti 25Ch2GNTA 25KF14N 2664
250 25Ch2GNTA-VD 25KFN14 2678
250 A 58 25Ch2M1F 25L 26A
250 A 61 25Ch2MF 25LAA 26C B
250-100 TF183 25Ch2N4MA 25LI 26C10BT
250-35-A5 25Ch2N4MA-Sh 25LII 26Ch14N2
2506 25Ch2N4MFA 25Mn 26Ch15KMJu
2507 25Ch2N4MFA-Sh 25Mn1S14 26Ch15KMT
250Ch25V3TL 25Ch2N4MFA-VD 25Mn4 26ChG2MF
250L0 25Ch2N4MSTsA 25MnG 26ChMA
250L15 25Ch2N4VA 25MnSi 26ChN3M2FA
250N 25Ch2N4VA-Sh 25MnTiBRE 26Cr4Mo2
251 25Ch2NMFA 25N10GChTJu 26CrMo4
251 A 58 25Ch2NML 25Ni-20Cr-6Mo 26CrMo4-2
251 A 60 25Ch2NMTsRA 25NJu 26G2S
251 H 60 25Ch5MA 25NL 26G2STA
2510 25ChGF 25ps 26H2MF
2511 25ChGFA 25R 26Mn5
2512 25ChGL 25S1C1 B 26Mo1
2515 25ChGM 25S2R 26Mo2
2516.0 BOHLER K 405 25ChGM-PV 25SiMn2MoV 26NiCrS4
2517 25ChGM-Sh 25T10P T 26rs
2519 25ChGMA 25Z 26S2
252 M 25ChGNMA 26 27 CrMoV 6-12
2523 25ChGNMT 26 C 27 G 051
253 25ChGNMT-Sh 26 CrMo 4 27 H 074
253 MA 25ChGNMTA 26 CrMo 4 S 27 MnB 4
253MA 25ChGSA 26 CrMo 7 27 MnB 5
254 EM 25ChGSA-Sh 26 Mn 5 27 MnCr 4-3
254 SLX 25ChGT 26 MnCr 4-3 27 MnCrB 5-2
254 SMO 25ChGT-PV 26 MnCr 6-3 27 MnCrV 4
254 SMO R 25ChGT-Sh 26 MnMoB 6-4 27 MnMo 3-3
2541 25ChGTA 26 MnSi 17 27 MnSi 5
2542 25ChMFA 26 MoCr 11 27 MnSiVS 6
2542.0 BOHLER K 450 25ChML 26 MoCr 11 S 27 P 066
255 25ChN3MFA 26 MoCr 11 X 27 Q 057
2550 25ChSNVFA 26 MoCr 11 XS 27-31-4
2562 25Cr13Mo6 26 NiCr 6 4 27.31.4.LCu
2562.0 BOHLER G 25Cr13Mo6 A 26 NiCrMo 14-5 27.31.4.LCuR
2564 25Cr2Mo1VA 26 NiCrMo 14-6 27.31.4S91
2567 25Cr2MoVA 26 NiCrMoV 11-5 270
2570 25Cr2MoVH 26 NiCrMoV 14-5 270-35-A5
2581 25Cr2Ni4WA 26 NiCrMoV 5 270-480
2584 25Cr3Mo55 26 NiCrMoV 8-5 270-480 W
25A 25CrMnSi 26 NiMoV 14-4 270-480W
25C12S14 25CrMnSiA 26-1 270-50-A5
25C4 25CrMo1VA 26-3 Mo 2705 Superduplex
25C4 P25 25CrMo4 26-3-3 2709.0 BOHLER W 722

 

 

 

 

 

 

 

We Export
Eastern Europe Asia North America Western Europe Middle East Africa
Austral asia Central South UAE America Portugal
Spain Indonesia Italy Angola Poland
Brazil Sri Lanka Russia Chile Singapore
Oman Venezuela Costa Rica USA Qatar
Thailand Canada Saudi Arabia Bahrain Egypt
Malaysia Turkey Mexico Chine Peru
United States Nigeria Jordan Kuwait Dubai
Bangkok Iran Germany UK New Zealand
Vietnam South Africa Kazakhstan